• FREE SHIPPING & RETURN

    Free shipping on all orders over $75.00

    USED BY THE PROS

    Used by our MARBLELIFE® stone craftsmen.

    PHONE SUPPORT

    support available during regular business hours.

  • Hot
    Marble-Polish

    MARBLELIFE® Marble Polish

    $29.95

    Polish / Etch & Ring Remover 16oz (formerly Gold Plus Gloss Restorer)

    • Description
    • Additional Information
    • Reviews (7)

    Product Description

    Marblelife Marble Polish is like having a service professional in a bottle. It’s a rare product in that it allows you to genuinely polish marble with safe abrasives and not just put an oily film on it. Marblelife Marble Polish allows you to polish out etches and light scratches, in most cases without having to call a service professional. Etches and scratches are damages to marble and with Marble Polish, you can restore your marble’s shine once again and without an oily film. This is only for polished marble. If used on a satin, matte or honed finish, it will begin to put a shine to the finish.

    Marble Polish is designed for small repairs like spots, spills, cup rings as well as on such areas as countertops, vanity tops or table tops. Marble Polish is not designed to polish large areas such as floors. For floors and large areas consult with a Marblelife Service Professional for trusted help.

    Marble Polish is a true professional’s product and is used by Marblelife Service Technicians. Marble varies from hard and dense to softer and more porous. As well, an etch can vary from light to an actual pit eaten out of the marble. This means that the degree of effort will vary as well.

    NOTE:  Marble Polish must be used in conjunction with Marblelife Marble & Travertine Cleaner in order to achieve a successful outcome.

    Before beginning, please read the following helpful information to insure a pleasant experience.  Also see our Marblelife Marble Counter & Table Top Kit both with and without 6” Orbiting Buffer.  These kits include everything you need and save you money.

    About Etches

    How to Protect You Marble, Travertine & Terrazzo

     

    Product Directions

    The following are two recommended procedures to properly polish out etches and light scratches form polished marble and travertine both with a buffer and without a buffer.  The choice to use a buffer is completely yours.  Buffers are most helpful in larger areas like countertops, vanities or table tops.  Small repairs like spots, spills or cup rings can be easily done by hand.  Either way, the choice is yours.

    Marblelife Polish is a professionals product and requires some care when being used.  You will want to work quickly once the product is on the marble surface.  If marble polish is left to sit on the surface without moving, it can cause an etch itself.  However, while in motion, it is wonderful for polishing marble.

    Based on the severity of the damage and the type of marble, multiple efforts may be required and patience is recommended.  Be assured that regardless of the outcome, Marblelife Customer Care is able to walk you through the process.  If for any reason you do not see the desired results, please contact Marblelife Customer Care for free assistance in achieving the desired results.

     

    With Buffer Method

    Using a low speed orbiting buffer can help make for easier work on larger areas.  Be careful to clear the area and protect as needed, as the buffer can at times splatter polish.  For this reason we recommend wearing old clothing and protect other nearby furniture or surfaces.  Before using the buffer, it is recommended that you first use the Without Buffer Method to gain an understanding of how your particular marble responds to the Marble Polish and to know how much Marble Cleaner is required.

    Needed Supplies: (Marble Kit includes everything except towels)

     

    Step 1 – Clean

    Before polishing, it is important that you first clean the area thoroughly with Marblelife Marble & Travertine Cleaner.  This neutralizes any acids that may be present and removes oils, dirt and other contaminants that you will not want in your polishing slurry.

    Spray Marble & Travertine Cleaner on surface and scrub with a clean soft cloth.  Allow the cleaner to soak for a couple minutes, then buff dry with the dry side of your cloth.  After buffing dry you are clear to proceed to step two.

    Step 2 – Preparing the Buffer & Pad

    Remove the backing from the piece of Velcro that came with your buffer.  Apply the self sticking piece of Velcro to the center of the bottom of the black rotating base of the buffer.  This will help hold the polishing pad in place.  Next, press the 6” Tan Polishing Pad to the bottom of the buffer.  The Velcro will not hold the polishing pad to the buffer, it will only help hold it in place while in use.

    Step 3 – Applying a Neutral Base

    Slowly spray an egg sized amount of Marble & Travertine Cleaner on the etched or scratched area.  Marble Polish is capable of polishing out heavy etches in hard marble, so to work with light etches in soft marble, we use Marble & Travertine Cleaner to “cool” down the Polish so that it doesn’t cause a larger etch.

    Step 4 – Applying the Polish

    Apply about a quarter size amount of Marble Polish onto the bottom of the tan polishing pad.  Place the pad and buffer over the damaged area, turn on the buffer and move the buffer in a small circular motion with a medium pressure.  Your pressure should be enough that it slows the buffer slightly, but not so firm that it drastically slows the buffer.  Polish for only about 10 seconds and IMMEDIATELY proceed to Step 5.

    Step 5 – Neutralize & Remove Polish

    Immediately spray Marblelife Marble & Travertine Cleaner onto the polished area enough to saturate the Polish on the marble surface and immediately wipe Polish off the surface with a paper towel.

    Step 6 – Clean & Survey

    After wiping the Marble Polish off, spray the Marble & Travertine Cleaner on the polished area again to thoroughly neutralize and clean the area.  Buff dry and assess your progress.  At this point the damage may be gone, you marble looks great and you are done.  If the etch is lighter but still visible, repeat Step 2 through 6 until damage is no longer visible.

    If the damage is gone or lighter, but the area you polished has a haze, you will want to repeat steps 2 through 6, but this time using more Marble & Travertine Cleaner to cool down the polish.  If after each application you are not seeing improved results, you should repeat Steps 2 through 6, but now using less to no Marble & Travertine Cleaner.

    If for any reason you are not satisfied with the results, please contact Marblelife Customer Care for free assistance in achieving the desired results.

     

    Without Buffer Method

    Polishing by hand is a good way to deal with small issues like spots, spills and cup rings.  It will take firm pressure, but allows you to do a small controlled area at a time to better understand how your particular marble responds to the Marble Polish.

    Needed Supplies: (Marble Kit includes everything except towels)

    Step 1 – Clean

    Before polishing, it is important that you first clean the area thoroughly with Marblelife Marble & Travertine Cleaner.  This neutralizes any acids that may be present and removes oils, dirt and other contaminants that you will not want in your polishing slurry.

    Spray Marble & Travertine Cleaner on the surface and scrub with a clean soft cloth.  Allow the cleaner to soak for a couple of minutes, then buff dry with the dry side of your cloth.  After buffing dry you are clear to proceed to step two.

    Step 2 – Applying a Neutral Base

    Slowly spray an egg sized amount of Marble & Travertine Cleaner on the etched or scratched area.  Marble Polish is capable of polishing out heavy etches in hard marble, so to work with light etches in soft marble, we use Marble & Travertine Cleaner to “cool” down the polish so that it doesn’t cause a larger etch.

    Step 3 – Applying the Polish

    Apply about a quarter size amount of Marble Polish onto the clean cloth.  With the Marble Polish on the rag, polish the damaged area in a circular motion with firm pressure.  Only do an 8” diameter area or smaller at a time.  Polish for only about 10 seconds and IMMEDIATELY proceed to Step 4.

    Step 4 – Neutralize & Remove Polish

    Immediately spray Marblelife Marble & Travertine Cleaner onto the polished area enough to saturate the polish on the marble surface and immediately wipe Polish off the surface with a paper towel.

    Step 5 – Clean & Survey

    After wiping the Marble Polish off, spray the Marble & Travertine Cleaner on the polished area again to thoroughly neutralize and clean the area.  Buff dry and assess your progress.  At this point the damage may be gone, you marble looks great and you are done.  If the etch is lighter but still visible, repeat Step 2 through 5 until damage is no longer visible.

    If the damage is gone or lighter, but the area you polished has a haze, you will want to repeat steps 2 through 5, but this time using more Marble & Travertine Cleaner to cool down the polish.  If after each application you are not seeing improved results, you should repeat Steps 2 through 5, but now using less to no Marble & Travertine Cleaner.

    If for any reason you are not satisfied with the results, please contact Marblelife Customer Care for free assistance in achieving the desired results.

     

    Marblelife… Helping Make Your Life Easier.

    Additional Information

    Weight 1.21 lbs
    Dimensions 2.5 x 2.5 x 8 in

    7 reviews for MARBLELIFE® Marble Polish

    1. 5 out of 5

      I never expected the awesome results I would achieve with MARBLELIFE products– The results were clearly better than anything else I had bought commercially before…

      As a chemist , I spilled some acid on my Uba Tuba granite countertop. The acid made a ‘ white ferning pattern’ in the dark granite and literally ate into the countertop. I tried sanding it, covering it up with shoe polish and permanent marker but nothing worked… I hoped my son wouldn’t see it but he gave me a loud “Dad, what happened to the countertop?” I was ready to replace the entire piece.

      Then the folks at MARBLELIFE let me try some of their “MARBLE POLISH Etch & Ring Remover”. With a wash rag and minimal circular motion buffing, the stain (fern pattern) literally ‘disappeared’!!! I WAS SOLD….

      Then they asked me to try the “MARBLE & TRAVERTINE CLEANER –INTERCARE” on my countertops and compare against my no streak glass cleaner I had been using….

      Again, the results were AMAZING!!! The MARBLELIFE INTERCARE clearly left a ‘shinier’ finish with much less residue… I am sold on MARBLELIFE one product at a time. The results are in the chemistry!!!! Sincerely, Thomas C., Orlando, FL

    2. 5 out of 5

      OMG! The red wine etched stain is completely gone! My MIL’s 50+ octagon coffee table is like new again! Followed directions to the T!

    3. 5 out of 5

      What an outstanding product!

    4. 5 out of 5

      Outstanding! My daughter trashes the guest vanity with her makeup every time she visits (marble is no match for glycolic acid). We used to spend up to $500 to have it refinished. Marblelife did it in 20 minutes for a fraction.

    5. 5 out of 5

      It really works. While deeply etched spots are not leveled, as described, they are smoothed and shined so they’re much less noticeable. I only did one tile, and people who didn’t know that I’d used this product commented on how shiny and clean that one tile looked in comparison to the others.

    6. 3 out of 5

      I really faught spending the money and the rediculous shipping expense for one bottle of this polish/etch remover but there just isn’t the availability in stores that I could find. So I broke down and bought it. I was new to the marble counters having just installed one in our bathroom and had wrecked it with Lysol spray. I had read the Comet would remove etches so I tried this in a small area. It worked but it removed all of the shine. I used this product and with a lot of elbow grease and repeated use it really did remove the etches and restore the shine. I did not use the accompanying cleaner that Marblelife says is required. Blue Dawn dishwashing soap works perfectly and costs a lot less. I was quite relieved when all was done and have learned my lesson. One is that I know I will never buy marble for my kitchen or floors. What a pain.

    7. 4 out of 5

      Very satisfactory so far!- So far it appears to have helped the situation. Hasn’t corrected it completely but will apply it again at a later date to be absolutely sure.


    Add a review