About This Product
MARBLELIFE Stone Sealer is a fantastic combination of the strongest features of a superior quality sealer, without the negative features of many popular sealers. For you technical folks, Marblelife Stone Sealer is both a hydrophobic and oilophobic fluoropolymer impregnating sealer. Simply put, it’s an ultra high quality sealer that penetrates into the stone and repels both water based and oil based items. This is healthy for your stone, provides breathability, is durable, long lasting and provides superior sealing protection.
Additionally, it is easy to use and low odor compared to most solvent based sealers that have strong VOC’s. It penetrates into your marble, or other natural stone, providing protection under the surface. It adheres a safe, durable, clear polymer material into the pores of the marble which keeps staining materials from entering and staining the stone. It also helps keep out unhealthy bacteria, germs, oils and dirt which are not good for your marble or your health. As an added feature, Marblelife Stone Sealer helps make cleaning quicker and easier. Moreover, it is easier to use than other solvent based sealers allowing virtually anyone to apply a quality application without streaking.
Additional helpful information for you:
Product Size Availability:
4 OZ – Expected Coverage 15 SQFT / GALLON
8 OZ – Expected Coverage 30 SQFT / GALLON
16 OZ – Expected Coverage 62 SQFT / GALLON
32 OZ – Expected Coverage 125 SQFT / GALLON
1 GAL – Expected Coverage 500 SQFT / GALLON
It is highly recommended that before applying a sealer, that you do a Deep Cleaning of your marble, granite, travertine, terrazzo, slate or other natural stone. This gets the oils and dirt out of the pores which keeps them from being sealed in and allows the sealer to penetrate better into all the stone’s pores.
Deep Cleaning Marble & Travertine Countertops, Vanities & Table Tops
Deep Cleaning Marble, Travertine & Terrazzo Floors
- MARBLELIFE Marble & Travertine Cleaner Ready to Use Spray
- MARBLELIFE Marble & Travertine Cleaner Concentrate
- MARBLELIFE Stone Sealer
- Microfiber Towel or other soft clean cloth
- Rag or sponge
Step 1 – Deep Cleaning
It is recommended before applying a sealer that you first do a deep cleaning as detailed in the above “Deep Cleaning” sections. After deep cleaning, we recommended that you allow the stone surface to dry for at least a few hours before proceeding with applying a sealer.
Step 2 – Wipe On & Soak
After your stone surface is clean and dry, use a clean dry cloth or sponge to apply the sealer onto the surface. Pour MARBLELIFE Stone Sealer either onto your clean dry cloth or pour an ounce directly onto the surface and spread around. Apply enough sealer so that the entire surface area is wet. Once entirely wet with sealer, allow to soak for 10 minutes. Make sure to keep all portions of the stone wet for the entire 10 minutes. If any area begins to dry, rub the wet sealer around the area to keep the area wet.
Step 3 – Buff Off
After soaking for 10 minutes, use a different clean dry cloth to buff dry the entire surface. Buffing dry assures that no sealer is allowed to dry on the surface causing streaks. If any streaks do occur, simply re-wet the streaks with sealer and rub out the streaks, then buff dry.
If you are not satisfied with the results, please contact Marblelife Customer Care for free assistance in achieving the desired results.
MARBLELIFE… Helping Make Your Life Easier.
Anonymous from Winfield, Kansas –
I have an old recycled piece of marble that I use to roll dough on. I cleaned the piece as per instruction with the Intercare Ready to use cleaner. Then followed instructions on bottle. It has worked fairly well. Any butter or oils don’t seem to be penetrating, but water still will leave a mark. I’m going to do a second coat and see if that helps.
(0) (0) Watch Unwatch